5-CHANNEL POWER AMPLIFIERS

 PRIME

 ROCKFORD FOSGATE 600 Watt 5-Channel Car Amplifier

• 5-channel Prime Series car amplifier
• 50 watts RMS x 4 at 4 ohms + 200 watts RMS x 1 at 4 ohms
• 75 watts RMS x 4 at 2 ohms + 300 watts RMS x 1 at 2 ohms
• 150 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
• CEA-2006 compliant
• selectable high-pass filter on front and rear channels (80 Hz, 12 dB/octave)
• variable low-pass filter on front and rear channels (50-250 Hz, 12 dB/octave)
• variable low-pass filter on subwoofer channel (40-130 Hz, 12 dB/octave)
• selectable bass boost on front and rear channels (0, 6, 12 dB at 45 Hz)
  variable bass boost on sub channel (0-12 dB at 45 Hz)
• Class AB amp technology in front and rear channels, Class D for sub channel
• remote Punch level control
• preamp inputs
• 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
• fuse rating: 40A x 2
• 17-1/8"W x 2-7/16"H x 7-11/16"D
• warranty: 1 year

$349.99
each

 KENWOOD EXCELON X series 5-Ch 50W x4 + 500W x1 RMS Power at 2ohms Amplifier

• 500W RMS x 1 @ 2 Ohms
• Bass Boost & Cooling Fan
• Low & High-Pass Filter
• Manufacturer Kenwood
• Channels 5-Channel
• RMS Power/Channel Over 300W
• Power at 2 Ohms 50W x 4
• Power at 4 Ohms 40W x 4
• Bass Boost
• Dimensions 12-3/4" 2-3/16" x 7-3/8"

$389.99
each

 KENWOOD EXCELON 5-CHANNEL REFERENCE AMPLIFIER

• Dimensions W 9-1/4” x H 2-3/16” x D 7-9/16”
• Power 80 x 4/350 x 1@4ohm <1%THD 90dBA (reference 1 watt into 4ohm)
• Power 80 x 4/350 x 1@2ohm
• Power 160 x 2/350 x 1@4ohm bridged
• Crossover filter
• High Pass 50-200Hz
• Low Pass 50-200Hz
• Removable top plate
• Runs more efficient and cooler than X4/1S
• Only 1/4” wider and 3/16” taller than X4/1S
• Most powerful amplifier in the industry for it’s size

$699.99
each

 PUNCH

 ROCKFORD FOSGATE 1,000 Watt Class-D Full-Range 5-Channel Amplifier

• 5-channel car amplifier
• 75 watts RMS x 4 at 4 ohms + 200 watts RMS x 1 at 4 ohms
• 125 watts RMS x 4 at 2 ohms + 500 watts RMS at 2 ohms
• 250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
• CEA-2006 compliant
• separate variable high-pass filters (50-500 Hz, 12 dB/octave) for front and rear channels
• variable low-pass filter (50-500 Hz, 12 dB/octave) for subwoofer channel
• variable bass boost (0-18 dB at 45 Hz) and for subwoofer channel
• switchable subsonic filter (25 Hz, 24 dB/octave) and phase switch for subwoofer channel
• full-range Class-D amplifier design
• Discrete Surface Mount construction
• 4-gauge power and ground leads and an 100-amp fuse recommended — wiring and hardware not included with amplifier
• no onboard fuses — when installing multiple amps in a system, an additional 100-amp in-line fuse between the distribution block and the amplifier is recommended
• 11-15/16"W x 2-3/16"H x 8-5/16"D
• warranty: 1 year

$699.99
each